- Pet water dispenser UV sterilization versionM5Stamp C3 Mate w/ Pin Headers

Title Default Title
Qty:

Description

  • M5Stamp C3 Mate w/ Pin Headers
  • Based on a 32-bit RISC-V microcontroller
  • Provides full Bluetooth 5.0 long-range
  • Antenna Type: 2.4G 3D Antenna
  • Bluetooth Version: 5
  • USB interface: Type C

The M5Stamp C3 Mate w/ Pin Headers is based on a 32-bit RISC-V microcontroller and operates at a maximum clock frequency of 160 MHz. With 400 KB of internal RAM and 4 MB Flash, it can facilitate many different use-cases involving connected devices.

The Stamp-C3 provides full Bluetooth 5.0 long-range (LR) support including long-range and mesh networking functions and achieves building devices with great coverage and improved usability. Furthermore, the exceptional heat resistance plastic enclosure is sustained at a higher operating temperature.

  • 1x M5Stamp C3
  • 1x Heat Resistant Sticker
  • 2x 2.54-9P Pin
  • 2x 2.54-6P Pin
  • 2x 90° Grove Connector
  • 1x M2 Hex Key

Size

  • 34 x 20 x 4.5 mm (L x W x H)
  • IO interface spacing: 2.54 mm

PDF File

  • ESP32-C3: 32bit RISC-V single-core processor, clocked at 160 MHz
  • Storage: 384KB ROM, 400KB SRAM, 8KB RTC SRAM, 4MB FLASH
  • Wi-Fi: 2.4 GHz band supports 20 MHz and 40 MHz bandwidth, IEEE 802.11 b/g/n protocol, data rate up to 150 Mbps
  • Bluetooth: 5, Bluetooth mesh, rate support 125 Kbps, 500 Kbps, 1 Mbps, 2 Mbps
  • Input voltage: 5 V at 500 mA
  • HMI: Programmable physical button x 1, reset debugging button x 1, programmable RGB LED (SK6812) x 1
  • USB interface: TypeC x1
  • Antenna Type: 2.4G 3D Antenna
  • Module peripheral interface resources: ADC, GPIO, SPI, UART, I2C, I2S, PWM, RMT, DMA, USB serial port, TWAI
  • IO interface x13: G21, G20, G9, G18, G19, G1, G0, G10, G8, G7, G6, G5, G4
  • Weight: 3.8 g